Kyocera QCP 6035 Reference Manual page 82

service. Network synchronization operations take additional time due to general
network latency (slowness) and overhead protocols.
Certain conditions must be met before you can perform your first
modem-to-modem synchronization.
The Kyocera smartphone already must have been synchronized with your
primary computer. (Your primary computer is the computer that stores all of
your information and that you use on a regular basis.)
The primary computer must have both Local and Network checked in the
HotSync Manager.
The appropriate user(s) must be selected. (In the HotSync Manager, select Setup,
then the Network Tab.)
Synchronizing
1. Start the HotSync application on your Kyocera smartphone.
2. Tap the Menu icon and select Modem Sync Prefs.
3. Select Direct to modem. Tap OK.
4. Select the Modem option on the main screen of the HotSync application.
5. Tap the below the HotSync icon and select Wireless Modem for the
connection type.
6. Tap Enter phone #, the Phone Setup screen will appear.
7. Enter the phone number of the modem that you will be dialing into and tap OK.
8. Tap on the icon in the center of the HotSync application. A circuit-switched data
call will be made to the modem on the primary computer and the
synchronization process will be begin.
NOTE: not