Kyocera QCP 6035 Reference Manual page 263

Read the HotSync Log for the user account for which you are synchronizing the
phone and computer. The HotSync Log may indicate where the problem is
occurring.
The phone does not turn on.
Adjust the contrast control.
Make sure the battery is installed properly.
Charge the battery for about 15 minutes.
Replace the battery. If the phone still does not operate, try a soft reset. (See
"Resetting the phone" on page
The phone doesn't recognize my handwriting.
When you enter text with the stylus, you must use the Graffiti characters. See
"Writing with the stylus" on page
Make the Graffiti character strokes in the Graffiti writing area, not on the display
part of the screen.
Make sure you are writing the strokes for letters in the left side, and the strokes
for numbers in the right side of the Graffiti writing area.
Make sure that Graffiti is not shifted into extended or punctuation modes. See
Writing with the stylus,page
Recalibrate the screen. Choose Digitizer from the Preferences pick list and follow
the directions.
When I tap screen icons, the right application or feature does not open.
Recalibrate the screen. Choose Digitizer from the Preferences pick list and follow
the directions.
When I tap , nothing happens.
Not all applications or screens have menus. Try a different application.
Beaming does not function.
Verify that the Beam feature is enabled (on the General Preferences screen). See
Beaming information,page
Make sure the application you are using supports the Beam feature.
Verify that the path between the two devices is clear of obstacles.
Try using the Beam feature at different distances. The usual distance for
beaming information is between five centimeters (approximately 2 inches) and
one meter (approximately 40 inches). However, in some cases, you may find that
greater distances work more effectively.
When data is beamed at the smartphone, an out-of-memory message appears.
The Kyocera smartphone requires at least twice the amount of memory available
as the data you are receiving. For example, if you are receiving a 30K application,
you must have at least 60K free.
258.)
52.
52.
91.