Kyocera QCP 6035 Reference Manual page 211

6. For information on Keyguard options, see "Using Keyguard" in chapter 13.
7. If you want to answer calls by pressing any key on the keypad, put a check mark
beside Any-Key Answer. If you don't want to use this feature, remove the check
mark.
8. To insert hyphens automatically in phone numbers, put a check mark beside
Auto-Hyphen. If you don't want to use this feature, remove the check mark.
9. Tap Done.
Use these settings if you want your phone to automatically add numbers before or
after your local or long-distance phone numbers (for example, a code number for
long-distance access). Any numbers you enter in this screen have precedence over
all other phone settings except the automatic Area Code setting. You can add up to
32 characters before and after the phone number, although only 12 are visible on the
screen.
1. From the Phone Preferences screen, tap Dialing.
2. If you want the phone to add area codes to phone numbers when you travel, tap
the beside Auto Area Code. The area codes are taken from your Address
Book, if available. Otherwise, when you are in Roaming mode, the phone insets
your home service area code.
The phone never inserts area codes.
The backlight comes on whenever you press any key and
remains on for 30 seconds after the last key press.
The backlight comes on whenever you press any key and
remains on for 10 seconds after the last key press. The
backlight remains on during all calls.
The backlight comes on whenever you press any key and
remains on for 30 seconds after the last key press. The
backlight remains on during all calls.