Kyocera QCP 6035 Reference Manual page 178

Entering phone settings
In the Phone Setup dialog, enter the telephone number you use to connect with your
ISP or dial-in server. Contact your carrier for the correct number.
1. Tap the Phone field to open the Phone Setup dialog.
2. Enter the phone number you use to reach your ISP or dial-in server.
3. Do one of the following:
If you need to enter a dial prefix, disable call waiting, or use a calling card
when you log in, continue to those sections.
If not, tap OK. Skip to
Entering a dial prefix
A prefix is a number you may need to dial before a telephone number. Ordinarily,
you should not need to dial a prefix.
1. Tap the Dial Prefix check box.
2. Enter the appropriate prefix.
Enter your ISP phone number here.
Tap here.
"Selecting a connection type" on page
Tap this box if you need to use a prefix.
Enter your prefix here.
178.