Kyocera QCP 6035 Reference Manual page 219

4. Tap the beside Default Ring and select a ringer sound. When you select a
sound, you hear a sample of it. The phone uses the default ringer for the
following types of calls:
If you do not use the Ring by Category feature: The default ringer is used
for all incoming phone calls.
If you use the Ring by Category feature: The default ringer is used for all
incoming phone calls that do not fall into the specified categories. For
example, if you have selected a ringer for your business calls and another
ringer for your personal calls (based on phone numbers in your Address
Book), the default ringer indicates a call from a number that is not in either
of these categories.
5. If you want to hear different ringer sounds for different categories of calls, do the
following steps.
a. Put a check mark in the Ring by Category check box.
b. Tap the under Category. Select a category of calls.
c. Tap the under Ringer. Select the sound for that category of calls.
d. Repeat steps b–c
6. When you have finished, tap Done to return to the Sounds Preferences screen.
You can set your phone to alert you for a variety of service situations, such as when
you leave your home service area or when you miss a call.
1. On the Sounds Preferences screen, tap Status.
You can select any number of these check boxes.
Tap Ring by Category.
Select a ringer sound for each category. Select a ringer sound for each category.
for each category you want to set up.