Kyocera QCP 6035 Reference Manual page 185

Use these menu commands to do the following
Create a new (empty) service template and add it to the Service pick list.
Delete a selected service template from the Service pick list.
Copy the selected service template and adds it to the Service pick list.
When you select the Options menu, the following command appears.
Use this menu command to do the following:
Display the Network Log screen
If you are having a problem establishing a network connection using TCP/IP, check
this section and try the suggestions listed.
Displaying expanded service connection progress messages
It's helpful to identify at what point in the login procedure the connection fails. An
easy way to do this is to display the expanded Service Connection Progress
messages. These messages describe the current stage of the login procedure. Press
the lower half of the Scroll button at any point during login to display these
messages.
Viewing the Network Log
If viewing the expanded Service Connection Progress messages does not give you
enough information to find out why you cannot connect to your ISP or dial-in
server, take a look at the Network Log. The Network Log lists all of the
communication that occurs between your modem and your dial-in server during the
login procedure. The information in the Network Log can help your ISP or your
System Administrator pinpoint where the login procedure communication fails and
why.
1. Tap to view the Applications Launcher.
2. Tap to open the last Preference screen you used.
3. From the pick list in the upper right corner, select Network.