Kyocera QCP 6035 Reference Manual page 108

This section covers the menu commands specific to the Address Book. For
information about menu commands common to all applications,
page 59.
The commands in the Record menu vary depending on which screen is open.
If the Address screen is open
Remove an Address Book entry. In the alert dialog, tap OK to
delete the entry. The entry is removed from the Address Book, but
a copy is sent to an archive file on your computer during your next
HotSync operation. To delete the entry completely, remove the
check mark from the Save archive copy on PC check box.
Create a note for the current entry.
Remove a note attached to an Address Book entry. In the alert
dialog, tap OK to delete the note or Cancel to keep the note.
Beam the current Address Book entry to another Kyocera
smartphone through the IR port.
Beam all Address Book entries in the current category to another
Kyocera smartphone through the IR port.
Select the current entry as your business card. To beam your
business card, use the Beam Business Card command.
Send the current business card to another Kyocera smartphone
through the IR port. You can also beam your business card by
holding down the Address Book button for at least two seconds.
If Address View is open
"Using menus" on