Kyocera QCP 6035 Reference Manual page 101

When you call automated systems, you often have to dial a series of numbers with
pauses between them (for example, when sending a page or entering a password).
You can place these pauses in the Address Book.
1. Press the Address Book
2. Tap the name of the entry you want to edit.
The Address View screen appears.
3. Tap Edit.
The Address Edit screen appears.
4. Tap the appropriate phone number. Enter a percent sign for a hard pause or a
comma for a timed pause wherever necessary.
To enter these punctuation marks using the on-screen keyboard, tap 123 in the
lower right corner of the Graffiti writing area.
To write these punctuation marks using Graffiti, first tap once to enter
punctuation mode. Then write the appropriate Graffiti stroke as shown in the
table below.
Press the up and down buttons.
In the Address screen, you move up or down by a screen of entries.
In the Address View screen, you move to the previous or next entry.
1. Press the Address Book
key.
When you call this number, the Kyocera smartphone
pauses at this point. It does not continue with the next
set of numbers until you tap Resume.
When you call this number, the Kyocera smartphone
pauses for two seconds before continuing with the next
set of numbers. You can enter as many commas as
necessary to extend the length of the pause.
key.