Kyocera QCP 6035 Reference Manual page 134

This section explains the menu commands that are specific to the Date Book. See
"Using menus" on page 59
applications.
Create an event. The Set Time dialog appears, where you can
choose start and end times for the new event. If you do not enter
start and end times, the event is untimed.
Remove an event from the Date Book. In the confirmation dialog,
tap OK to delete the event or Cancel to keep it. You must tap an
event before you use the Delete Event command.
When you delete a recurring event, you have the choice of
removing a single event only, the current and all future
occurrences, or all occurrences.
By default, the event is removed from the Date Book, but a copy is
transferred to an archive file on your computer during your next
HotSync operation. To remove the event completely, uncheck the
Save archive copy on PC check box.
Create a note for the current event.
Delete the note attached to an event. In the confirmation dialog, tap
OK to delete the note or Cancel to save it.
Remove events older than a certain time to conserve memory.
By default, the events are removed from the Date Book, but copies
are transferred to an archive file on your computer during your
next HotSync operation. To remove the event completely, uncheck
the Save archive copy on PC check box.
The Purge command deletes repeating events if they end before the
date that you activate the Purge command.
Beam the current event to another device with an infrared port. See
"Beaming information" on page
for information about menu commands common to all
91.