Kyocera QCP 6035 Reference Manual page 16

1
Backlight button and infrared port—Tap
the button to turn the screen on and off.
Press and hold the button to turn the
backlight on and off. Point the infrared port
at other devices for beaming data.
Antenna—Extend during calls.
2
LED
3
Green = Home area
Amber = Roaming
Red = No signal or low power
Stylus—Slide the stylus out of its slot. Hold
4
it like a pen to write on the screen. N
, ,
USE A PEN PENCIL OR OTHER SHARP OBJECT ON
THE SURFACE OF THE SCREEN
Shuttle—Roll the shuttle up or down to
5
scroll through menus.
Press it in to make selections. During a call,
roll it up or down to adjust the volume.
6
Headset jack—Plug the headset cable in
here.
Data port—Plug the data cable in here.
7
Power port—Plug the power cable in here
8
to recharge the battery without the sync
cradle.
When the phone is turned on
You can send and receive calls. If there is an incoming, outgoing, or active phone
call, information about the call appears on the screen.
You can use the phone with the keypad flipped open or closed. If you are using
an application when the phone rings, you can answer the call with confidence.
The Kyocera Smartphone stores your work for you automatically.
When the phone is turned off
You can use all the organizer features, but you cannot send or receive calls, send
or receive email, or search the Web.
2
EVER
.
1
3
4
5
6
7 8