Dtcs Polarity Setting - Icom ID-E880 Instruction Manual

DTCS polarity setting

q Enter "DTCS-P" (DTCS polarity) in the DUP.T menu.
MENU DUP.T DTCS-P (p. 122)
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
[MENU ]
[DIAL] [ ]
w Rotate [DIAL] to select and set the desired DTCS polarity,
then push [ ](MONI).
• BOTH N : Normal phase is used for both TX and RX.
(Default)
• TN-RR : Normal phase is used for TX; Reverse phase
for RX.
• TR-RN : Reverse phase is used for TX; Normal phase
for RX.
• BOTH R : Reverse phase is used for both TX and RX.
e Push [MENU
] to exit the DUP.T menu screen.
TONE SQUELCH AND POCKET BEEP
z Enter "DTCS-P" (DTCS polarity) in DUP.T menu.
SET
MENU DUP.T
B
(Push [ B(D-OFF)] to enter MENU screen),
SET
(Push [Y] or [Z], then push [
x Push [Y] or [Z] to select the desired polarity,
then push [ B(D-OFF)].
SET
c Push [
A(MW)] to exit the DUP.T menu
CLR
screen.
12
DTCS-P (p. 122)
B(D-OFF)].)
SET
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
149