All Reset; Partial Reset - Icom ID-E880 Instruction Manual

13
OTHER FUNCTIONS

All reset

The function display may occasionally display erroneous in-
formation
(e.g. when first applying power)
externally by static electricity or by other factors.
If this problem occurs, turn power OFF. After waiting a few
seconds, turn power ON again. If the problem persists, per-
form the following procedure.
• Partial reset is also available. See right for details.
IMPORTANT!:
Resetting the CPU CLEARS all programmed contents to
the their default settings.
q Push and hold [
w Push and hold simultaneously [MENU
then turn power ON to reset the CPU.
[MENU ]
[S.MW]
154
POWER ON
AT
. This may be caused
] for 1 sec. to turn power OFF.
] and [S.MW],

Partial reset

If you want to initialize the operating conditions
VFO settings, menu group's contents)
ory contents, call sign memories or repeater lists, a partial
reset function is available.
q Push and hold [
] for 1 sec. to turn power OFF.
w Push and hold simultaneously [S.MW] and [VFO/MHz],
then turn power ON to reset the CPU.
[S.MW] [VFO/MHz]
POWER ON
AT
(VFO frequency,
without clearing the mem-