Copying Memory/Call Contents - Icom ID-E880 Instruction Manual

7
MEMORY/CALL CHANNELS

Copying memory/call contents

This function copies a memory channel's contents to the VFO
(or another memory/call channel)
for signals around a memory channel frequency and for re-
calling the frequency offset, subaudible tone frequency etc.
D Memory/call VFO
q Select the memory (call) channel to be copied.
Push [M/CALL] several times to select the memory
mode or call channel mode, then rotate [DIAL] to select
the desired channel.
w Push and hold [MW](S.MW) for 1 sec. write the selected
channel contents to the VFO mode.
• Returns to the VFO mode automatically.
[EXAMPLE]: Copyinig memory channel 11 to VFO.
Front panel operation:
Push [M/CALL] to select memory mode.
[DIAL]
[M/CALL]
HM-133 operation:
[S.MW ]
Push
96
. This is useful when searching
MR/
to select memory mode.
CALL
z Select the memory/call channel to be copied.
MR/CALL
MW
x Push [FUNC], then push and hold
/
[
CLR
memory/call channel contents to the VFO.
• The VFO mode is selected automatically.
Rotate [DIAL] for selecting memory channel.
Select memory channel.
Push
Push [MR/CALL] to select the memory
mode, then select the desired memory
channel via [Y]/[Z] or keypad.
Push and hold [MR/CALL] for 1 sec. then
push [Y]/[Z] to select the call channel.
A(MW)] for 1 sec. to copy the selected
Push and hold [MW] for 1 sec.
then push and hold for 1 sec.