Table of Contents
Advertisement
7
MEMORY/CALL CHANNELS
Memory bank setting
The ID-E880 has a total of 26 banks
channels, 0 to 999, are assigned to any desired bank for easy
memory management.
q Push [S.MW] to enter the select memory write mode.
• "X" indicator and the memory channel number blink.
w Rotate [DIAL] to select the desired memory channel.
e Push [
](MONI) to select "BANK" setting.
r Push [
](MONI) again.
• Bank group and channel number are displayed if the selected
memory channel has already been assigned to a bank.
[DIAL]
[S.MW
]
[
92
. Regular memory
(A to Z)
Push [
]
Push [
]
]
t Rotate [DIAL] to select the desired bank group from "A" to
"Z".
[DIAL]
y Push [ ](LOW) to select the bank channel digit, then rotate
[DIAL] to select the bank channel number from "00" to "99."
• Push [ ](CS) to return to the bank group selection, if desired.
[DIAL]
[ ] [ ]
[
]
u Push [
](MONI) to set the bank initial and channel num-
ber.
i Push and hold [MW](S.MW) for 1 sec. to assign the chan-
nel to the bank.
• Return to the previous indication before entering the select mem-
ory write mode.
Rotate [DIAL]
Advertisement
Table of Contents
