Repeater Operation - Icom ID-E880 Instruction Manual

Repeater operation

1. Setting duplex
Push [BAND] then rotate [DIAL] to select the frequency
band.
Push [BAND] again, then rotate [DIAL] to select the re-
peater frequency.
Push and hold [DUP](LOW) for 1 sec. then rotate [DIAL]
to select minus duplex or plus duplex.
Push [DUP](LOW) again.
[DIAL] [DUP]
2. Repeater tone
Push and hold [TONE](M/CALL) for 1 sec. then rotate [DIAL]
to select "TONE," if the repeater requires a subaudible tone to
be accessed. Push [TONE](M/CALL) again.
[DIAL] [TONE]
QUICK REFERENCE GUIDE
Using the HM-133
Plus or minus duplex selection and the repeater tone setting
can be done easily via the HM-133.
Push [ 7(TONE)] for minus duplex; [
DUP –
for plus duplex selection, push [FUNC] then [
to turn the repeater tone ON.
Push
Push
Push , then
8(TSQLS)]
DUP +
7(TONE)]
DUP –
X