Table of Contents
Advertisement
11
DTMF MEMORY ENCODER
D Transmitting a DTMF memory directly
z Push [FUNC] then [
DTMF-S
DTMF memory encoder ON.
• " " appears in place of 100 MHz digit.
x Push [DTMF-S] to turn the DTMF memory di-
rect selection ON.
• The function indicator (microphone) lights green.
c Push the desired DTMF channel.
• "0" to "9," "A" to "D," " " and "#" are available for
DTMF memory channels.
• The selected DTMF tone sequence is automati-
cally transmitted without pushing PTT.
NOTE: When no DTMF tone sequence pro-
grammed channel number is pushed, it transmits
the relative DTMF tone sequence as the manual
transmission described as at right.
v Push [DTMF-S] again to deactivate the DTMF
memory direct selection.
b Push [FUNC] then [
the DTMF memory encoder.
144
6(DTMF)] to turn the
LOW
B(D-OFF)] to cancel
SET
D Manual transmission
z Deactivate the DTMF memory encoder by
DTMF-S
pushing [FUNC] then [
x Push [DTMF-S] to turn the DTMF direct selec-
tion ON.
• The function indicator (microphone) lights green.
c Push one of "0" to "9" and "A" to "F" keys mo-
mentarily, then push the desired DTMF keys,
0–9 and A to F.
• A: [
A(MW)]
CLR
C: [
C(T-OFF)]
ENT
E: [
(TONE-1)] F: [
VOL
Z
• Automatically transmits without pushing PTT.
• The first code entering may not be transmitted
due to start transmitting takes 400 msec. Thus
the DTMF code transmission starts from the 2nd
code.
v Push [DTMF-S] again to deactivate the DTMF
direct selection.
B(D-OFF)].
SET
B: [
B(D-OFF)],
SET
D: [
D(MUTE)],
SQL
Y
#(16KEY-L)]
SQL
Z
Advertisement
Table of Contents
