Table of Contents
Advertisement
• Program scan link name programming
q Rotate [DIAL] to select the program scan link number for
which you want to program a name.
w Push [
](MONI) to enter program scan link setting.
e Rotate [DIAL] to select "NAME."
r Push [
](MONI) to enter the name programming state.
t Rotate [DIAL] to select the desired character, number,
symbol or space; push [ ](LOW) or [ ](CS) to move the
cursor right or left, respectively.
y Push [
](MONI) to program the repeater name and exit
the state.
u Push [MENU
] to exit MENU screen operation.
MENU SCREEN OPERATION
• Program scan link setting (ADD)
q Rotate [DIAL] to select the program scan link number that
you want to add.
w Push [
](MONI) to enter program scan link setting.
e Rotate [DIAL] to select "ADD."
r Push [
](MONI) then rotate [DIAL] to select the desired
programmed scan number to be linked.
• Only programmed scan numbers that have not linked in the se-
lected program link number are displayed.
• Push [Ω](CS) to cancel the selection.
t Push [
](MONI) to add the selected programmed scan.
• Return to the previous indication as step e.
y Repeat steps e to t to continue the program scan link
setting or push [MENU
tion.
10
] to exit MENU screen opera-
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
125
Advertisement
Table of Contents
