Simplex Operation In The Vfo - Icom ID-E880 Instruction Manual

5
DV MODE OPERATION

Simplex operation in the VFO

D Sending CQ
q Set the desired frequency. (pgs. 14, 15)
• Select output power, if desired. (p. 18)
w Set the current MY call sign to your own call sign. (p. 42)
e Set the current UR call sign. (p. 42)
UR call sign selection
q Push and hold [UR](DR) for 1 sec. to enter UR call
sign selection mode.
• Push [BAND] several times to select "GRP CQ" (CQCQCQ)
"GRP UR" (UR call sign memories) and "CS" (current call
sign).
• The DV mode is automatically selected.
w Rotate [DIAL] to select "CQCQCQ."
[DIAL] [BAND] [UR]
e Push [UR](DR) to return to frequency indication mode.
r Push and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• "$" appears and the RF meter shows the output power.
• "CQCQCQ" is displayed and scrolled in sequence on the fre-
quency display depending on "TX CS" setting (p. 136).
56
t Release [PTT] to return to receive.
• The other station's call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 44 for details.
• Current call sign setting example (Simplex CQ)
CQ
UR
R1: NOT USE
Confirmation
q Push [CS] to enter the current call sign mode.
• Current UR call sign is displayed.
w Rotate [DIAL] to select and confirm the other current call
sign.
• ("UR"), "R1," "R2" and "MY" appears in sequence.
MY call sign
JA3YUA
MY
R2: NOT USE