Table of Contents
Advertisement
9
PRIORITY WATCH
D Memory/call channel and memory scan watch
via the microphone
z Select the VFO mode; then, set the desired fre-
PRIO
quency.
3
x Set the watched channel(s).
For memory channel watch:
Push [MR/CALL] then [Y] or [Z] to select the de-
sired memory channel.
For memory scan watch:
Select the memory mode, or desired bank
group.
Push [
selection.
Push [Y] or [Z] to select the desired scan
type, then push [
memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [Y] or [Z]
to select the call channel.
c Push [
PRIO
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 109)
• To resume the watch manually when paused, push
[
3(PTT-M)].
PRIO
v To stop the watch, push [
114
2(T-SCAN)] to enter the scan type
SCAN
2(T-SCAN)] to start the
SCAN
3(PTT-M)] to start the watch.
A(MW)].
CLR
D VFO scan watch via the microphone
z Select the VFO mode; then, set the desired fre-
PRIO
quency.
3
x Set the watched channel(s).
For memory channel watch:
Push [MR/CALL] then [Y] or [Z] to select the de-
sired memory channel.
For memory scan watch:
Select the memory mode, or desired bank group.
Push [
2(T-SCAN)] to enter the scan type
SCAN
selection.
Push [Y] or [Z] to select the desired scan
type, then push [
memory scan.
For call channel watch:
Push [MR/CALL] for 1 sec. then push [Y] or [Z]
to select the call channel.
c Push [
3(PTT-M)] to start the watch.
PRIO
• The transceiver checks the memory or call channel
every 5 sec.
• The watch resumes according to the selected scan
resume condition. (p. 109)
• To resume the watch manually when paused, push
[
3(PTT-M)].
PRIO
v Push [
2(T-SCAN)] to enter scan type selection.
SCAN
b Push [Y] or [Z] to select the desired scan type
from "ALL," "BAND" "P-LINK x
"PROGxx
xx
(
= 0–24)
2(T-SCAN)] to start the
SCAN
x
and
(
= 0–9)"
," "DUP."
Continues to the next page
Advertisement
Table of Contents
