Skip Channel/Frequency Setting - Icom ID-E880 Instruction Manual

8
SCAN OPERATION

Skip channel/frequency setting

Memory channels can be set to be skipped during memory
skip scan. In addition, memory channels can be set to be
skipped during both memory skip scan and frequency skip
scan. This is useful to speed up the scan rate.
q Select a memory channel:
Push [M/CALL] to select the memory mode.
Rotate [DIAL] to select the desired channel to be a skip
channel/frequency.
[DIAL][M/CALL]
w Push [S.MW](MW) to enter the select memory write
mode.
• "X" indicator and the memory channel number blink.
e Push [ ](MONI).
108
r Rotate [DIAL] to select "SKIP," then push [ ](MONI).
Rotate [DIAL]
[S.MW ] [DIAL] [ ]
t Rotate [DIAL] to select the skip condition from "SKIP,"
"PSKIP" or "OFF" for the selected channel.
• PSKIP : The channel is skipped during memory/bank scan and
the programmed frequency is skipped during VFO scan,
such as programmed scan.
• SKIP : The channel is skipped during memory or bank scan.
• OFF : The channel is scanned during any scan.
y Push [ ](MONI), then push and hold [MW](S.MW) for
1 sec. to store the skip condition into the memory.
" " " "
• or appears, according to the skip selection in the
step y.
" " appears
Skip channel setting
Push [ ]
" " appears
Program skip setting