Monitor Function; Audio Mute Function - Icom ID-E880 Instruction Manual

2
BASIC OPERATION

Monitor function

This function is used to listen to weak signals without disturb-
ing the squelch setting.
[MONI]
Push [MONI] to open the squelch.
• "BUSY" blinks.
• Push [MONI] again to cancel the function.
Push [
MONI
• Push [
MONI
MONI
1
NOTE: When the [SQL] adjustment is set too far clock-
wise, (13–17 o'clock position) the squelch attenuator is
activated. To monitor weak signals on the operating fre-
quency, deactivate the squelch attenuator function. See
page 19 for details.
20
1(BANK)] to open the squelch.
1(BANK)] again to cancel the function.

Audio mute function

This function temporarily mutes the audio without disturbing
the volume setting. (microphone only)
Push [FUNC] then [
MUTE
audio signals.
• Push [ A(MW)] (or any other key) to cancel the
CLR
function.
Shows above indications alternately
D(MUTE)] to mute
SQL Y