Table of Contents
Advertisement
t Push [
](MONI) to program the symbol code, then exit
programming.
y Push [ ](CS) to return to GPS-A set mode screen.
When "OTHER" is selected, check the symbol codes of
APRS
®
and set it correctly.
- Comment
Program up to a 43-character* comment. The programmed
comment is transmitted with the GPS position data.
* Only 36 character are available when "CUR.SPD" (COURSE/
SPEED) is selected in DT EXT (data extension).
q Push [ ](MONI) to enter programming.
w Rotate [DIAL] to select the desired character.
• The selected character blinks.
• Push [≈](LOW) to move the cursor right; push [Ω](CS) to move
the cursor left.
• Push [CLR](DR) to erase the selected character, or push and
hold [CLR](DR) for 1 sec. to erase the characters following the
cursor.
e Repeat step w until the desired comment is pro-
grammed.
MENU SCREEN OPERATION
r Push [ ](MONI) to program the comment and exit com-
ment programming.
t Push [ ](CS) to return to GPS-A set mode screen.
D GPS auto transmission
Selects the desired interval for automatic position transmis-
sion function from OFF (default), 5, 10, 30 second, 1, 3, 5, 10
and 30 minutes.
NOTE: When four sentence formatters are activated at
the same time ("Sentence formatter setting" on page 139),
"5SEC" cannot be selected.
10
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
141
Advertisement
Table of Contents
