Table of Contents
Advertisement
D Calling a specific station
q Set the desired frequency. (pgs. 14, 15)
• Select output power, if desired. (p. 18)
w Set the current MY call sign to your own call sign. (p. 42)
e Set the current UR call sign. (p. 42)
UR call sign selection
q Push and hold [UR](DR) for 1 sec. to enter UR call
sign selection mode.
• Push [BAND] several times to select "GRP CQ" (CQCQCQ)
"GRP UR" (UR call sign memories) and "CS" (current call
sign).
• The DV mode is automatically selected.
w Rotate [DIAL] to select the specific station call sign.
[DIAL]
[BAND]
[UR]
e Push [UR](DR) to return to frequency indication mode.
r Push and hold [PTT] to transmit and speak into the micro-
phone at normal voice level.
• "$" appears and the RF meter shows the output power.
• UR call sign is displayed and scrolled in sequence on the fre-
quency display depending on "TX CS" setting (p. 136).
DV MODE OPERATION
t Release [PTT] to return to receive.
• The other station's call sign will be received.
• Received call signs can be stored into the received call record
automatically. See page 44 for details.
• Current call sign setting example (Simplex call)
Station call sign
JG3YMK
UR
R1: NOT USE
NOTE: The digital mode operation is vastly different from
the FM mode. One of the differences is that in digital
mode the squelch does not function as in the FM mode.
Changing the squelch setting will not open it to hear the
hiss of "white noise." It only activates for digital squelch
functions such as CSQL
.
(Digital call sign squelch)
My call sign
JA3YUA
MY
R2: NOT USE
or D SQL
(Digital code squelch)
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
57
Advertisement
Table of Contents
