Subaudible Tones (Encoder Function) - Icom ID-E880 Instruction Manual

Subaudible tones
D Subaudible tones
q Select mode/channel for which you wish to set the subau-
dible tones, such as the VFO mode or a memory/call chan-
nel. (Subaudible tone is available in FM/FM-N only.)
• The subaudible tone frequency is independently programmed
into each mode, band or channel.
w Enter "R TONE" in DUP.T menu.
MENU DUP.T R TONE (p. 121)
(Push [MENU ]), (Rotate [DIAL], then push [
[MENU ]
[DIAL] [ ]
e Rotate [DIAL] to select and set the desired subaudible fre-
quency, then push [ ](MONI).
r Push [MENU
] again to exit DUP.T menu.
NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or the
VFO mode is selected. To store the tone frequency perma-
nently, overwrite the channel information.
(Encoder function)
](MONI).)
• Subaudible tone frequency list
REPEATER OPERATION
z Set mode/channel for which you wish to set the
SET
subaudible tones, such as the VFO mode or a
B
memory/call channel. (Subaudible tone is avail-
able in FM/FM-N only.)
• The subaudible tone frequency is independently pro-
grammed into each mode, band or channel.
x Enter "R TONE" in DUP.T menu.
MENU DUP.T
(Push [ B(D-OFF)] to enter MENU screen),
SET
(Push [Y] or [Z], then push [
c Push [Y] or [Z] to select the desired subaudible
tone frequency then push [
Push
v Push [
A(MW)] to return to the VFO mode.
CLR
67.0 79.7 94.8 110.9 131.8
69.3 82.5 97.4 114.8 136.5
71.9 85.4 100.0 118.8 141.3
74.4 88.5 103.5 123.0 146.2
77.0 91.5 107.2 127.3 151.4
3
R TONE (p. 121)
B(D-OFF)].)
SET
B(D-OFF)].
SET
(unit: Hz)
156.7 171.3 186.2 203.5 229.1
159.8 173.8 189.9 206.5 233.6
162.2 177.3 192.8 210.7 241.8
165.5 179.9 196.6 218.1 250.3
167.9 183.5 199.5 225.7 254.1
3
25