Scan Operation; Scan Types - Icom ID-E880 Instruction Manual

8

SCAN OPERATION

Scan types

Scanning searches for signals automatically and makes
it easier to locate new stations for contact or listening pur-
poses.
FULL SCAN
(p. 102)
118
MHz
Scan
Jump
PROGRAMMED SCAN
(p. 102)
Band Scan edges
edge xxA xxB
Scan
Jump
PROGRAMMED LINK SCAN
Repeatedly programmed scans user-programmed frequen-
cies selected at P-LINK items in the SCAN menu screen.
100 100
Repeatedly scans all frequen-
cies over the entire band.
999.990
Some frequency ranges are
MHz
not scanned according to the
frequency coverage of the
transceiver's version.
Repeatedly scans between
two user-programmed fre-
quencies. Used for checking
Band
edge
for frequencies within a speci-
fied range such as repeater
output frequencies, etc.
(pgs. 102, 124)
SELECTED BAND SCAN
(p. 102)
Band Band
edge edge
Scan
Jump
FREQUENCY/MEMORY
SKIP FUNCTION
(p. 108)
Band Band
edge edge
Scan
SKIP SKIP
Jump
Repeatedly scans all frequen-
cies over the entire selected
band.
Skips unwanted frequencies
or channels that inconve-
niently stop scanning.
This setting can be turned
ON or OFF for each memory
channel.