D Copying The Call Record Contents Into Call Sign Memory - Icom ID-E880 Instruction Manual

D Copying the call record contents into call sign memory

This is a way to copy the call record contents
into call sign memory
"RXRPT1" and "RXRPT2")
at the same time or individually.
peater list "R-L"
q Enter RX CAL (RX call sign) mode.
MENU RX CAL
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• RX call sign screen is displayed.
w Rotate [DIAL] to select the desired record channel.
e Push [ ](MONI) several times to select the desired call
sign from CALLER, / (CALLER's note), CALLED, RXRPT1
and RXRPT2.
CALLER : The station call sign that made the call.
/ : 4 character note with call sign that made the call.
CALLED : The station call sign called by the caller.
RXRPT1 : The repeater call sign used by the caller station in the
same zone, or gateway repeater call sign of the down
link repeater when the caller station is in a different
zone.
RXRPT2 : The repeater call sign for down link repeater.
r Push [ ](LOW) to enter copy select mode.
• Copy select screen is displayed.
t Rotate [DIAL] to select the desired call sign to be copied
("CALLER,"
"UR" and re- from "C ALL," "C UR01"–"C UR60," "C R-L" and "CLEAR."
• "C ALL" selection won't appear when either station call sign
memory or repeater list has no blank channel.
y Push [ ](MONI) to copy the selected record's contents
into the appropriate call sign memory or repeater lists.
C ALL
C UR01– :
C UR60 : Copy the caller call sign in "CALLER" to "UR" (sta-
C R-L
CLEAR
u Push [MENU
DV MODE OPERATION
: Copy the caller call sign in "CALLER" to "UR" (sta-
tion call sign memory) and the repeater call sign
in "RXRPT1" / "RXRPT2" to the repeater lists. This
selection won't appear when either station call sign
memory or repeater list has no blank channel.
tion call sign memory). This selection appears
when entering the copy select mode (step r) from
"CALLER" only.
: Copy the repeater call sign in "RXRPT1" / "RXRPT2"
to the repeater lists. This selection appears when
entering the copy select mode (step r) from
"RXRPT1" or "RXRPT2" only.
: Clear (erase) the selected call record contents.
] to return to frequency indication.
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
47