Icom ID-E880 Instruction Manual page 67

• Skip setting
Unwanted access repeater can be skipped for rapid selection
or scan.
q Enter "EDIT-L" in RPT-L menu.
MENU RPT-L EDIT-L
(Push [MENU ]), (rotate [DIAL], then push [ ](MONI).)
• Programmed repeater name appears.
w Rotate [DIAL] to select the desired access repeater to be
skipped.
• Push and hold [BAND] for 1 sec. to enter group selection, rotate
[DIAL] to select the desired group (0–9) then push [BAND].
e Push [DR] to toggle the skip setting ON or OFF.
• "SKIP" appears when the channel is set as skip channel.
SKIP indicator shows the selected repeater can not be used
for access repeater (RPT1) in DR mode as follow reasons.
• "R1 USE" is set to "NO."
• Either "FREQ" (frequency) or "DUP" (duplex direction)
has not been programmed.
SKIP indicator
DV MODE OPERATION
5
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
49