Table of Contents
Advertisement
1
PANEL DESCRIPTION
D Function guide indicator
The function guides give you easy menu access to a variety
of functions. Two function guides are available.
• Secondary function guides
VFO/MHz M/CALL
DR
These function guides indicate the secondary functions for
below the keys. Push and hold for 1 sec to activate the indi-
cated functions. See page 2 to 3 (t to !0 ) .
• Set condition guides
VFO/MHz M/CALL
DR
Set condition guides appear when the transceiver enters the
MENU screen, select memory write state, etc.
6
CS
LOW
MONI
q
w
e
r
CS
LOW
MONI
q CLEAR KEY [CLR](DR)
During programming state for call signs, repeater list,
memory name, etc., push to erase the selected charac-
ter.
(pgs. 30, 32, 33, 39, 40, 94)
During programming state for call signs, repeater list,
memory name, etc., push and hold for 1 sec. to erase all
character following the cursor.
w LEFT KEY [ ](CS)
During programming state for call signs, repeater list,
memory name, etc., push to move the cursor left.
(pgs. 30, 32, 33, 35–40, 94)
During MENU screen operation, push to select the
upper layer.
(p. 116)
e RIGHT KEY [ ](LOW)
During programming state for call signs, repeater list,
memory name, etc., push to move the cursor right.
(pgs. 30, 32, 33, 35–40, 94)
During MENU screen operation, push to select the
lower layer.
(p. 116)
r ENTER KEY [ ](MONI)
During programming state for call signs, repeater list, etc.,
push to set or store the setting.
During MENU screen operation, push to enter or exit
to/from the selected set items, etc.
NOTE: During set condition guide indication, [BAND]
key is also used instead of [ ](MONI).
(pgs. 30, 32, 33, 37–40, 94)
(pgs. 30–33, 35–40, 94)
(p. 116)
Advertisement
Table of Contents
