Table of Contents
Advertisement
5
DV MODE OPERATION
Repeater operation in the VFO
D Calling CQ in the same area (Area CQ)
q Set the desired repeater's frequency, offset and shift direc-
tion (pgs. 14, 15, 23, 27), then select the DV mode (p. 18).
Your own call sign (step w) and station call sign (step e)
can also be set as same as repeater call signs in current
call sign mode (step r).
w Set the current MY call sign to your own call sign.
• See pgs. 42, 43 for current call sign setting details.
e Set the current station call sign as follows:
Push and hold [UR](DR) for 1 sec. to enter UR call sign
selection mode.
• Push [BAND] several times to select "GRP CQ," then "CQC-
QCQ" is selected automatically. Push [UR](DR) again.
r Set the current repeater's call sign as follows:
z Push [CS] to enter the current call sign mode.
• UR call sign is displayed.
• Push [M/CALL] to toggle the call sign and repeater name
indications.
x Rotate [DIAL] to select "R1," access repeater's call sign,
then push [ ](MONI) to enter the current call sign se-
lection mode.
c Rotate [DIAL] to select the desired access repeater's
call sign, then push [ ](MONI) to set the call sign for
"RPT1."
• Return to the current call sign mode.
Pushing and holding [BAND] for 1 sec. selects the repeater group when in selection mode.
58
v Rotate [DIAL] to select "R2," linked repeater's call sign, then
push [ ](MONI) to set the current call sign selection mode.
• "RPT2" call sign screen is displayed.
b Rotate [DIAL] to select "NOT USE," then push
[ ](MONI).
• Return to the current call sign mode.
n Push [MENU
] to return to frequency indication.
t Push [PTT] to transmit; release to receive.
• "CQCQCQ" is displayed and scrolled in sequence on the fre-
quency display depending on "TX CS" setting (p. 136).
• Current call sign setting example
CQ
Zone
q
w
Area
Repeater q JP3YHL
My call sign
JA3YUA
UR
R1:
e
r
MY
R2: (NOT USE)
Advertisement
Table of Contents
