Menu Screen Operation; General; Entering Menu Screen And Operation - Icom ID-E880 Instruction Manual

10

MENU SCREEN OPERATION

General

MENU screen is used for programming infrequently changed
values or conditions of functions.
D Entering MENU screen and operation
[EXAMPLE]: Set "KEY B" (Key-touch beep) to OFF.
q Push [MENU
• One of "TS," "DUP.T," "SCAN," "SET," "DV SET," "CALL-S," "RX
CAL," "MESSAG," "RPT-L" or "GPS" appears.
w Rotate [DIAL] to select "SET," then push [ ](MONI).*
• Push [Ω](CS) to select the previous indication.
• Example
[MENU ]
[DIAL] [ ](MONI)
116
] to enter MENU screen.
Push [MENU ]
Rotate [DIAL]
Push [ ](MONI)
e Rotate [DIAL] to select "SOUNDS," then push [
(MONI).*
• Push [Ω](CS) to select the previous indication.
r Rotate [DIAL] to select "KEY B," then push [ ](MONI).*
• Push [Ω](CS) to select the previous indication.
t Rotate [DIAL] to select "OFF," then push [ ](MONI).*
y Push [MENU
] to return to the indication before enter-
ing MENU screen.
Rotate [DIAL]
Push [ ](MONI)
Rotate [DIAL]
(MONI) ↔ [BAND] or [≈](LOW)
[ ]
*
Push [ ](MONI)
Rotate [DIAL]
Push [ ](MONI)
]