Table of Contents
Advertisement
Digital squelch
NOTE: Use digital code squelch when operating with two or
more stations, because the digital call sign squelch function
recognizes "MY" (your own call sign). Thus the digital call
sign squelch function can be used when operating with only
one station.
q Set the desired operating frequency in the DV mode.
w Set the current call signs, "MY" (your own call sign) and
"UR" (other station call sign) and/or Digital code. See next
page.
e Push and hold [TONE](M/CALL) for 1 sec. to enter the
tone selection state.
r Rotate [DIAL] to activate the digital code or digital call
sign squelch, then push [TONE](M/CALL) again.
• Digital call sign beep "
"D SQL," Digital code beep "
"CSQL" appears in order.
[DIAL]
[TONE]
D SQL," Digital call sign squelch
CSQL" and Digital code squelch
TONE SQUELCH AND POCKET BEEP
t When the received signal includes a matching call sign/
code, the squelch opens and the signal can be heard.
• When the received signal's call sign/code does not match, digi-
tal call sign/digital code squelch does not open; however, the
S-indicator shows signal strength.
• Emits beep tones for 30 sec. and blinks "
selected in step r.
Digital call sign pocket beep
Digital call sign squelch
12
" if pocket beep is
Digital code pocket beep
Digital code squelch
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
151
Advertisement
Table of Contents
