Placing RFID
Summit WMScanner allows you to place RFID devices within your building drawing. To do this, select
Equipment > RFID > Place RFID.
The Place RFID dialog box lists the RFID readers supported by Summit WMScanner, along with the max
antenna limit.
To place a RFID reader in a drawing, select (highlight) a RFID reader from within the Model Field and
click the Place RFID button. Continue to place multiple RFID readers by clicking in the drawing again.
By default only one antnenna is associated with each RFID reader. To add more antennas to a RFID
reader, refer to
"Adding/Editing the Antenna" on page
157.
The following RFID readers can be placed:
RD5000
●
Summit WMScanner Users Guide
153