This dialog lists the number of zones along with the Zone Name, the Zone Type, the Floor, and the
Visibility of the existing zones.
Edit Zones – This option is same as Add Zone functionality of the drawing. You can redraw the
●
existing zone, or edit the Zone Name, Zone Type, and the Coordinates using this option.
Remove – this option allows you to remove the existing zones from the drawing. Select the zone you
●
want to remove and then click the Remove button.
Toggle Visibility - See
"Toggling the Visibility of the Zones" on page 190.
●
Toggle All -
See"Toggling the Visibility of the Zones" on page 190.
●
Refresh - This option refreshes the drawing. All the new color definitions of the existing zones are
●
visible only when you refresh the drawing.
Colors - See
"Defining Zone Colors" on page 190.
●
Floor – this option allows you to view another floor in the drawing.
●
Done – this option allows you to exit the dialog box by commiting the changes.
●
Summit WMScanner Users Guide
189