Manual Data Entry - Extreme Networks Summit WMScanner User Manual

NOTE
Best practice tip: Document the MAC Address and SSID on a sheet of paper before removing the access point
from Summit WMScanner. This information can be added using one of the ADD buttons.
5 When finished modifying the Authorized List, click the OK button. The Measurement control panel
will display the new state of each access point.
6 To filter the access points based upon Authorized List status, use the View pull-down. When you are
finished with the measurement survey, select Exit. This process is complete.

Manual Data Entry

In Manual Data Entry mode, Markers are manually placed throughout the drawing map.
1 To associate an access point with the measurement run, select the access point from the drop-down
menu.
2 Select the Record Measurements/Markers button.
The Record Data dialog box displays, allowing record measurement data.
The button allows you to pan the drawing. The
the drawing. The
allows you to change from Marker mode to Track mode.
The button in the Record Data dialog box allows you to set measurement options. In the
resulting Options dialog box, the Quick Save button allows you to immediately flush all
measurements to the measurement logfile for safekeeping. The data backup interval controls how
Summit WMScanner Users Guide
button undoes the last marker or track mode run. The list box at the top
button allows you to zoom in and out in
87