Editing Rfid - Extreme Networks Summit WMScanner User Manual

The following options are available in the Edit/Remove RFID dialog box:
Edit – the edit option allows you to edit an individual RFID's name, description, IP address, MAC
●
address, floor, height of floor, x-coordinate, y- coordinate, and marker size. You can also double-click
any field of the RFID row to bring up the Edit RFID dialog box. This Edit RFID dialog box allows
you to edit the antenna associated with each RFID. See
Move - the move option allows you to move a RFID reader to a new location on the drawing. To
●
move a RFID, select it from the list and then Click the Move button. Click on a new location on the
drawing, to move the RFID to a new location.
Copy – the copy option allows you to copy the RFID reader to a new location. To copy a RFID
●
reader, select it from the list and click the Copy button. You may then Click at the location on the
drawing where you want the RFID reader to be copied to place a copy of the RFID, in the same way
you use the Place RFID command. Press the ESC key to return to the Edit/Remove RFID dialog box.
You can copy a RFID to another floor in the drawing by first changing to that floor.
Remove - the remove option permanently removes the RFID reader from the drawing. To remove a
●
RFID reader, select it from the list and then Click the Remove button. To remove multiple RFID
readers, Press the CTRL key and select multiple RFID and then Click the Remove button.
NOTE
Moving, copying, and removing a RFID reader moves, copies, and removes the antennas associated with that
RFID reader.
Exit – this option allows you to exit the Edit/Remove RFID dialog box.
●

Editing RFID

Choosing the Edit button from the Edit/Remove RFID dialog box opens the Edit RFID dialog box. This
dialog box allows you to configure your RFID reader and also edit the antennas associated with the
RFID reader.
Summit WMScanner Users Guide
"Editing RFID" on page 155 for more details.
155