Current Partition Categories - Extreme Networks Summit WMScanner User Manual

Model Building
This dialog lets you pick a new partition type to assign to one or many partitions on the drawing.
After selecting this menu command, you will be prompted to select the new partition type and the floor
upon which the changed partitions should appear. Keep in mind that all of the selected objects will be
formatted to one of the choices available in this dialog box and all of the objects will be placed on the
floor specified in the combo box at the top of the dialog box. After clicking Select you have the option of
selecting one or many objects by clicking them with the cursor. Alternatively, you can use more
drawing aids such as windows or fences to select several objects. To exit the selection mode and return
to the Change Partition Type dialog box, press the ESC key.

Current Partition Categories

Summit WMScanner ships with default names for partitions and default colors for partition objects.
Selecting Format Building > Current Partition Categories allows you to select the eight partitions used for
the current drawing.
NOTE
You were already given the opportunity to select your eight partitions when creating a the project workspace with the
Project Workspace Creation Wizard. Changing the partitions here may change the partitions assigned to Category 1.
The Identify Building Materials dialog box is shown on the following page. This dialog lets you select the
current eight partitions used in the drawing.
Summit WMScanner Users Guide
200