Extreme Networks Summit WMScanner User Manual page 181

5 Set the floor Alignment Point.
Step five requires that you set an alignment point for the floor. The alignment point you choose will
become the origin for the x-y plane represented by a top-down view of the drawing. The Building
Floor Manager uses the origin of the x-y plane to align building floors vertically with the Assemble
Floors command. Therefore, it is important that you choose a floor alignment point that is common
among all floors that you wish to align. For example, choosing the bottom left corner of every floor
will often work well for rectangular shaped floors.
To set the floor alignment point, press the Set Alignment Point button and click the point on the
drawing you wish to become the origin.
Select Lock cursor to line endpoints during align before setting the floor alignment point. This option
allows you to set the origin at the end point of a line with precision.
Summit WMScanner Users Guide
179