Editing/Removing Controllers - Extreme Networks Summit WMScanner User Manual

To place a controller in the drawing, double left click the hardware description in the Place WLAN
Controller dialog box and then left click at the location in the drawing where you would like the device
placed. You may continue to place multiple devices by clicking in the drawing again.
To exit placement, press the ESC key, which will return you to the Place WLAN Controller dialog box.
The following example shows the result of the manual placement.
Once you are satisfied with the controller placement, you are ready to configure the settings.

Editing/Removing Controllers

The Equipment > WLAN Controller > Edit/Remove WLAN Controller command allows you to edit, remove,
and move any controller in the drawing. Selecting Equipment > WLAN Controller > Edit/Remove WLAN
Controller opens the dialog box.
Summit WMScanner Users Guide
145