Editing/Removing Zones - Extreme Networks Summit WMScanner User Manual

Model Building
'
Name: This option allows you to name the zone.
■
Draw: This option allows you to draw a zone of the selected type. To draw a zone, click on the
●
drawing and draw a polygon.
NOTE
Summit WMScanner does not allow two zones of the same type to overlap and displays a warning message.
Coordinates: This option allows you to edit the x-y coordinates of the recently drawn zone.
●
To edit the x-y coordinates of the recently drawn zone, click any cell/field and then re-enter the
coordinates. After you are done, Click OK to commit the changes. Click Cancel to exit without commiting
the changes.

Editing/Removing Zones

Summit WMScanner allows you to edit, remove, change floor and colors of zone types, and toggle
visibility of the zones. It also allows you to refresh the drawing explicitly to view the changes made to
the drawing. To edit the exisitng zones, select Format Building > Zone > Add/Edit/Remove Zone.
188
Summit WMScanner Users Guide