Within a drawing file, all the controllers must have a unique name. That is, the name entered in the
Name Edit Box cannot be used for any other controller within the drawing. If you accidentally enter a
duplicate name in the box, Summit WMScanner will display a warning message. Note that the MAC
Address field must be entered correctly if you plan to export your design to WMS.
Hardware Configuration - The Hardware Configuration section contains three fields: Description Field,
●
IP Address Field, and MAC Address Field. Each of the fields is user editable.
Hardware Position - This enables you to enter the absolute position of the controller on the floor
●
within the building. All coordinates are given relative to the origin (also called the Floor Alignment
Point) of the building coordinate system.
Managing Sensors
The following sections describe the taks involved in placing, updating and moving sensors.
Summit WMScanner Users Guide
147