Selecting the Place Reference-Tag command displays the following dialog box:
The Place Reference-Tag dialog box allows you to place the reference-tag of your choice - active tag or
passive tag.
Active-Tags: These are WiFi tags whose location is provided to the RTLS engine. This information is
●
used to increase the locationing accuracy of any WiFi device.
Passive-Tags: The location of these tags is tracked and provided to the RTLS. This information is used
●
to determine the position of the mobile RFID reader that reads the tag, and to increase the WiFi
locationing accuracy.
To place a reference-tag, select the tag you want to place, select the floor where you want to place the
reference-tag, and then click the Place Reference-Tag button. Alternately, you can double-click the tag. To
place multiple tags, you can continue to click on the drawing again. The following example shows the
result of manual reference-tag placement.
Summit WMScanner Users Guide
159