Configuring Measurement Visualizations - Extreme Networks Summit WMScanner User Manual

Measurement Surveys

Configuring Measurement Visualizations

Summit WMScanner automatically picks an area of your drawing over which to generate measurement
visualizations. You may configure this area as well as other grid visualization options such as the
resolution of the display. To configure these options, click the Grid Options button on the measurement
visualization panel:
Selecting Grid Options opens the Visualization Options dialog box:
The Visualization Options dialog box allows you to do the following:
Set the Visualization Boundary - The visualization boundary represents the area of the drawing over
●
which the grid values will be calculated for measurement data. If no measurement data is taken in a
particular area of the grid boundary, no information will be displayed. You can reduce the amount
of time Summit WMScanner takes to produce visualizations by reducing the area of the boundary.
To set the visualization boundary, choose Select Region and then click the Pick button from the
Visualization Options dialog box. You will be prompted to use your mouse to draw a box on the
screen that represents the new boundary area.
Set Distance Visualization Limit - The distance visualization limit represents the maximum distance at
●
which measurement data are considered for visualization purposes. For a typical indoor office
environment, this value should not be changed from the default 5 meter value. If you wish to
achieve a greater resolution of measurement data you should consider taking more measurement
points within your facility.
104
Summit WMScanner Users Guide