Extreme Networks Summit WMScanner User Manual page 180

Model Building
For more information on processing a CAD drawing file with the Process Unformatted dialog box, see
"Format CAD Drawing" on page
For more information on processing a raster image with the Draw Partition dialog box, see
Partitions" on page
Once you have completed formatting your drawing file, press the Next button to continue to step
four.
4 Scale the Drawing
This step requires you scale the floor you have sketched. It is important for Summit WMScanner to
know the relational distance of one wall to another. Press the Scale Floor button on the wizard dialog
to begin scaling the drawing. You will be prompted to select two locations by left clicking your
mouse at two different points in the drawing. After selecting two points, you will then be prompted
to enter a the physical real world distance between those two points.
You may choose to check the option to Lock cursor to line end points during scale to enable you to
accurately scale the drawing based on the distance from the end point of one wall to the end point
of another wall.
assembled drawing without using the Building Floor Manager.
NOTE
You cannot lock you cursor to elements in an image, only objects in the drawing such as lines or partitions.
178
192.
196.
"Scale Drawing" on page 208 provides additional information on scaling a final
"Drawing
Summit WMScanner Users Guide