Edit Sub-Menu; Cut Wall; Copy Wall; Paste Wall - Extreme Networks Summit WMScanner User Manual

Scale Drawing
Set Building
Coordinate Reference
Point
Advanced

Edit Sub-menu

The Edit sub-menu provides the standard Windows file editing capabilities such as cut, copy, paste, and
erase.

Cut Wall

The cut wall removes selected objects from the drawing and places them on the Windows Clipboard. To
insure drawing information stability, Summit WMScanner does not allow certain entities (such as access
points) to be cut from the database. Instead, use the appropriate command within the Network Design
menu.

Copy Wall

Copies selected wall objects to the clipboard.

Paste Wall

Inserts data from the clipboard on the drawing or at insertion point.

Erase Wall

This command removes the selected objects from the drawing without placing them on the Windows
Clipboard.
Summit WMScanner Users Guide
The Scale Drawing command allows you to resize entities within the
environment. You can scale the entire drawing (both formatted and
unformatted), or only the formatted entities of one drawing or each entity-by-
entity. You will be prompted to select two points in the drawing (by clicking
with the mouse) and you can then enter the actual physical distance between
the two locations you picked. The appropriate scaling will be applied so that
the distance between the points within the drawing matches the value you
enter. If your drawing contains measurement data, you should erase it before
using the scale command.
Specifies an origin in the drawing. This allows you to set a single reference
point from which all other coordinates are determined. This is the common
reference point used to align multiple floors.
This command provides access to the Building Manager, Drawing Limits, Layer,
LineWeight, Prune Overlapping Partitions, Break/Ungroup Entities. See
"Advanced Sub-menu" on page 36.
35