Leave Floor Empty; Sketch Floor Plan - Extreme Networks Summit WMScanner User Manual

and your work will be lost). Press the Next button on the wizard to continue to the next step. Use the
Back button to repeat previous steps.
Detailed instructions on formatting floors by various methods are described in the following sections.

Leave Floor Empty

Selecting the Leave Floor Empty option on the first dialog box of the Floor Formatting Wizard is the same
as pressing the Cancel button on the Floor Formatting Wizard dialog box. Choose this option if you decide
that you do not wish to format this floor at this time. Pressing the Next button will present you with a
screen stating that you have chosen to leave the selected floor empty. Simply press the Finish button on
the Floor Formatting Wizard to return to the main dialog of the Building Floor Manager.

Sketch Floor Plan

Selecting the Sketch Floor Plan option on the first dialog of the Floor Formatting Wizard will allow you
to sketch the layout of a building floor plan. There are six steps to sketching a floor plan:
1 Select Sketch Floor Plan.
After selecting the Sketch Floor Plan option on the first dialog of the Floor Formatting Wizard, press
the Next button to continue to step two of the wizard.
2 Set the Slab-to-Slab Height.
In this step, enter the desired height for the floor. You may do so in either feet or meters.
●
3 Sketch Floor.
Summit WMScanner Users Guide
171