Click the Configure Visible Data button to configure the displayed information/columns. The Select Scan
List Columns to be Displayed dialog box appears. Select the columns to be displayed in the Panel. You can
also change the order in which the columns need to be displayed.
The Select Scan List Columns to be Displayed dialog box contains the following controls:
Hidden Columns List Box: Contains the columns which you do not want to display on the
●
Measurement Scan List panel. You can select multiple columns simultaneously, however, columns are
not sorted. Double-click any element in the list to move all the selected elements to the Visible
Columns list box. Initially, this list is empty.
Visible Columns List Box: Contains the columns that you want to display on the Measurement Scan List
●
panel. It supports multiple selections, however, elements are not sorted. Double-click any element in
the list to move all the selected elements to the Hidden Columns list box. Initially, this list contains all
the support columns.
>> button: Moves all the elements from the Hidden Columns list box to the Visible Columns list box.
●
> button: Moves the selected element(s) from the Hidden Columns list box to the Visible Columns list
●
box.
<< button: Moves all the elements except MAC Address from the Visible Columns list box to the Hidden
●
Columns list box.
< button: Moves the selected element(s) from the Visible Columns list box to the Hidden Columns list
●
box. You can not hide MAC Address. If you select MAC Address to hide, the following warning
message appears: "MAC Address can not be hidden".
Up button: Moves the selected element up in the order by one position. This button is enabled if you
●
select one element from the Visible Columns list box.
Down button: Moves the selected element down in the order by one position. This button is enabled
●
if you select one element from the Visible Columns list box.
OK button: Completes the process of selecting the columns to be displayed in the Measurement Scan
●
List panel.
Cancel button: Cancels the current selection. The Measurement Scan List panel displays the last
●
selected columns.
Summit WMScanner Users Guide
83