Table of Contents
Advertisement
Grid Options - Opens the Visualization Options dialog box.
●
Filter Measured Values - The pull-down menu allows you to display the visualization based upon
●
access point/base station Channels, SSID, or Association status.
Standard - This General Settings option allows you to select the Air Interface Standard such as IEEE
●
802.11g, 802.11a, 802.11b, and 802.11n. Available Air Interface Standard options are dependent on the
configuration of the selected access point.
Floor
- Toggles the currently displayed floor.
●
Signal - Allows you to adjust the displayed min/max dBm ranges.
●
Refresh - Redraws the visualization display.
●
Clear Map - Clears the display of all visualizations.
●
Exit - Exits the Visualization panel.
●
To run map visualizations, first choose the Filter Measured Values (Channel, SSID, or Association
status), select the Standard, and Floor for which you want to run a visualization. Next, choose your
desired visualization mode by selecting the appropriate Display Options pull-down and highlighting the
visualization type.
For each visualization that you run (Channel, Coverage, SNR, SSID, Expected Legacy Data Rate, Noise,
Hybrid Network Overlap, Channel Width Configuration, Channel Width Performance, Data Rate
Performance), all grid information such as access point type, access point name, and grid results are
also displayed within the Legend Data panel.
Summit WMScanner Users Guide
103
Advertisement
Table of Contents
