Measurement Survey Data - Extreme Networks Summit WMScanner User Manual

Sensor
RFID
Reference Tag
The Measurement Survey menu provides the ability to collect wireless network measurement data and
use that information to locate access points, visualize coverage, and generate measurement files.
Measurement Survey is discussed in more detail in

Measurement Survey Data

Record New Data
Configure Scan
Settings
Configure
Authorized List
Summit WMScanner Users Guide
This command opens a fly-out menu for placing, editing/removing, moving, and
copying sensors.
This command opens a fly-out menu for placing, editing/removing, and moving
RFID readers. The RFID readers come with a default antenna. You can add
more antennas and also edit antennas. See
page 157 for more details.
This command opens a fly-out menu for placing, editing/removing, and moving
Reference-Tags. These are equipment placeholders used to improve the
accuracy of Real Time Locationing System (RTLS). See
page 158 for more details.
"Measurement Surveys" on page
This command will launch a client application that will allow you to collect
measurement information about your network from a WLAN (Wireless LAN)
card. See "Taking Measurements" on page 74
Select this command to specify which access point channels Summit
WMScanner will scan, and the scan duration (dwell time). These settings are
controlled from the Configure Scan Settings dialog. See
Measurements" on page 74
Select this command to filter viewing of access points of various classes.
Filtering is controlled from the Configure Authorized List dialog. See
"Configuring the Authorized List" on page 84
"Adding/Editing the Antenna" on
for details.
for details.
for details.
"Reference Tags" on
73.
"Taking
41