Moving Sensors; Copying Sensors - Extreme Networks Summit WMScanner User Manual

Moving Sensors

The Move Sensor command is a quick way to change the location of a sensor which has already been
placed. To do this, select Equipment > Sensor > Move Sensor. The Move Sensor dialog box displays.
From the Move Sensor dialog box, select the sensor that you wish to move and click Move. Your pointer
will take on the appearance of the sensor that you selected from the list. Move the sensor to the desired
location and left-click to place it. You may also move multiple sensors simultaneously by selecting more
than one sensor before clicking Move. Click Finished after you are done moving sensors.

Copying Sensors

The Copy Sensors menu command works very similar to the Move Sensor command. To copy one or
more sensors on a floor, select Equipment > Sensor > Copy Sensor. The Copy Sensor dialog box appears
Summit WMScanner Users Guide
151