Viewing In 3D - Extreme Networks Summit WMScanner User Manual

Model Building
• You can also toggle floor selection by using the Current Floor link in the Legend Data window.

Viewing In 3D

The best way to get a full perspective of RF obstructions is to view your building model in 3D.
Summit WMScanner's virtual environment models are inherently three dimensional. By default, the
ceiling heights you specify are used to determine the vertical height on a given floor. If a partition
resides on floor two of a building, the ceiling height of floor two is used to determine the height of the
partition, unless otherwise specified by you while drawing the partition. This is done automatically for
you during the formatting process. Thus, when you have finished formatting a drawing using Format
Building, even though the formatting process was strictly two dimensional, the final drawing is a true
3D site-specific model.
You can see the three-dimensional building structure by selecting View > 3D Views > 3D Orbit. A circle
will appear around the drawing. Now right-click on the drawing and select Preset Views > SW Isometric.
Summit WMScanner Users Guide
210